The passive speaker shall be one of the most compact in the market with a remarkable performance-to-size ratio. It shall consist of twelve 3.15” long-excursion full-range cone drivers with a Neodymium magnet assembly mounted on a 100 cm (39.4”) array in a sturdy aluminium cabinet enclosure which shall be all-weather resistant — suitable for both outdoor and indoor applications. The speaker shall provide true line array characteristics: phase coherence, low distortion and focused listening in both the near field and at a distance from the speaker. The speaker shall have two different impedance settings for a higher or lower impedance (4Ω / 16Ω). The loudspeaker shall only be operated by a compatible amplifier with loaded presets onboard. The cones shall be protected only by a rigid grill and without any other backing material that could effect the quality and safety of the speaker. The cabinet of the speaker shall feature a dedicated aluminium bracket or two different threaded anchor points to be installed on a wall or ceiling. The speaker shall be able to be integrated with other units of the same model and, when required, a suitable subwoofer to extend its frequency range for more demanding applications. The connectors shall be recessed and fitted with two 4-pin Speakon sockets. The loudspeaker shall have a nominal horizontal dispersion angle of 90° and a selection between 7° or 30° for vertical in order to avoid unpleasant acoustic reflections from both the ceiling and the floor. The power handling capacity shall be 720 WAES with a max power of 1200 WRMS. The frequency response (+/- 10dB) measured on axis shall be 100 Hz to 20 kHz with a maximum sound pressure of 134 dB (peak). The speaker shall be as discreet as possible and shall be easily integrated in every kind of environment and/or surface. The dimensions (WxHxD) shall not exceed 89 x 1000 x 118 mm (3.5” x 39.4” x 4.6”) and shall weigh no more than 12 kg (26.5 lbs). The loudspeaker shall be the KP102 Python by K-array with finishes available in black, white (KP102W) and brushed (KP102XB), polished (KP102XP) or 24K gold plated (KP102XG) stainless steel.