General

• Type:  

  Passive subwoofer

• Transducers:  

  6.5" woofer + passive radiator

• Frequency Response:  

  45 Hz - 150 / 500 Hz (-6 dB)
  

   ⁽¹⁾

• Max SPL:  

  120 dB (peak)

   ⁽²⁾

• Rated Power:  

  100 W

• Coverage:  

  Omni

• Connectors:  

  2PIN euroblock connector (included)

• Nominal Impedance:  

  2 Ω

Handling and Finishes

• Dimensions (W x H x D):  

  182 x 176 x 341 mm (7.1 x 6.9 x 13.4 in)

• Weight:  

  3.5 kg (7.72 lb)

• Material:  

  Aluminum

• Colors:  

  Black

• Finishes:  

  Powder Matte

Regulations

• IP Rating:  

  IP64

• (1) With dedicated preset
• (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.

• Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.

• New materials and design are introduced into existing products without previous notice.

General

• Type:  

  Line array

• Transducers:  

  4 x 1" neodymium magnet woofers

• Frequency Response:  

  150 Hz – 18 kHz (-6 dB)

   ⁽¹⁾

• Max SPL:  

  108 dB (peak)

   ⁽²⁾

• Rated Power:  

  75 W

• Coverage:  

  V. 25° | H. 140°

• Connectors:  

  2PIN euroblock connector (included)

• Nominal Impedance:  

  8 Ω / 32 Ω selectable

Handling and Finishes

• Dimensions (W x H x D):  

  40 x 260 x 22 mm (1.56 x 10.24 x 0.85 in)

• Weight:  

  0.4 kg (0.88 lb)

• Material:  

  Aluminum

• Colors:  

  Black, White, Custom Ral

• Finishes:  

  24K Gold, Polished

Regulations

• IP Rating:  

  IP65

• (1) With dedicated preset
• (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m

• Passive loudspeakers require a dedicated preset loaded onboard K-array amplifiers.

  New materials and designs are introduced into existing products without previous notice.

General

• Type:  

  4ch switching mode, Class D Amplifier

• Output Power:  

  4x 50 W @ 4 Ω

• Impedance:  

  minimum 4 Ω (2 Ω PBTL)

• Frequency Response:  

  20 Hz – 20 kHz (±1 dB)

• Connectors:  

  Input:
  4x BAL input: Euroblock 1.5/ 3-ST-3.81, 
  3.5 mm jack unBAL analog stereo AUX input,
  TOSLINK optical input,

  Output:
  2x Euroblock 2,5/ 4-G-5,08

  Digital:
  4x USB-A 2.0,
  1x RJ45 Ethernet,
  Bluetooth 4.1 Low Energy, 
  Wi-Fi IEEE 802.11 b/g/n

• Built-in DSP:  

  Grouping, Input EQ, Output EQ, Signal Routing, Level adjustment, Dynamic Limiters, Delay

• Remote Control:  

  Wi-Fi dedicated K-array Connect mobile app. Ethernet wired K-framework3 multiplatform design and tuning software

• MAIN Operating Range:  

  Dedicated AC/DC power adapter 100-240V ~ AC, 50-60 Hz input / 24 V, 4 A DC output

• Power Consumption:  

  20 W @ 4 Ω load, Pink noise, 1/8 rated power

• Protections:  

  Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection, Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection

Handling and Finishes

• IP Rating:  

  IP20

• Dimensions (W x H x D):  

  219 x 45,5 x 170 mm (8.6 x 1.8 x 6.7 in)

• Weight:  

  0.7 kg (1.5 lb)

• Material:  

  Aluminum