The Kommander-KA84 is a 4-channel per 2000W on 4Ω. It has 4 fully-independent and configurable channels: 4 analog IN and 2 AES-EBU IN to 4 OUT. The KA84 can be used as a mixer for fixed installations thanks to the microphone and Phantom power options available on every analog IN. 2 GPIO ports give easy external analog controls using K-array accessories.
Read more about the Kommander line.
We created a portfolio complete with lightweight products that are easy to transportation and quick to setup optimizing logistics, space, labor costs and time.
Built-in DSP allows for fine tuning of every single sonic parameter of the loudspeaker, providing the sound engineer the highest control on overall performance and fine granularity in system configuration.
With the dedicated K-dante accessory, this solution can be integrated into a Dante network making it interoperable with other devices.
Onboard Touch Screen
An integrated touch screen provides intuitive control over the main DSP functions, from signal routing to level and delay settings.
- Max Output @ 4Ω 4 x 2000 W (1)
- Max Power @ 8Ω 4 x 1000 W (1)
- Max Power Bridged@ 8Ω 2 x 4000 W (1)
- Minimum Impedance4 Ω (Single Channel Mode) 8 Ω (Bridge Mode)
- Distortion (THD+N) <0.09% 1W to full power@4Ω
- Input Impedance 10 kΩ balanced
- Gain 32 dB
- Output Unbalanced to Ground
- Bandwidth 20 Hz - 20kHz (±1 dB)
- Damping Factor >10000 @ 100 Hz
- Thermal yes
- Short Circuit / Overload yes
- Clip Limit / Analog Signal Limit yes
- Analog Connectors 4 Male + 4Female 3-Pin Balanced XLR
- Digital Connectors 1 Male + 1 Female 3-Pin XLR
Remote control input
- Connectors 1 Male + 1 Female XLR Parallel 1 USB B Jack Serial Converter
Audio Powered Output
- Connectors 2x4 Pin Speakon NL4
- NL4 1 Wiring 1+1-=A1 / 2+2- =A2
- NL4 2 Wiring 1+1-=B1 / 2+2- =B2
- Connector 2 x PowerCon IN / OUT
- Nominal Voltag 100 - 240V 50/60 Hz with PFC
- Operating Range AC 90 - 264V
- Efficiency >79% (typical)
- 1/8 Rated Power (Pink Noise)@ 8Ω 600 VA
- IP 20
- Dimensions 43.0 x 9.4 x 29.5 cm (16.92“ x 3.7” x 11.61“)(2)
- Weight 6.4 kg (14.1 lb)
- Notes for data:
- EIAJ Test Standard, 1KHz, 1%THD
- (W x H x D)
New materials and design are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this catalogue.
Kommander-KA84 Datasheet Ver 3.0
K-framework ManualVer. 2.6
K-framework 2.2.8 - WindowsVer. 2.2
KA24 KA84 User GuideVer. 1.4
KA24 KA84 DWG 3DVer. 2.1
KA24 KA84 DXF 2DVer. 4.0
KA24 KA84 LayoutVer. 2.1
KA24 KA84 PDF 3DVer. 1.0
KA24 KA84 3DS 3DVer. 1.0
KA24/KA84 Architect SpecsVer. 2.0
Amp-to-Speakers TableVer. 2.1
Kommander Certifications ver. 1.0Ver. 1.0
Applicazioni dei clienti
Kommander-KA84 si può usare con successo in un'ampia varietà di contesti ed eventi..