General

• Type:  

  Active line array element

• Transducers:  

  8x 8" Neodymium magnet woofer with 2.5" voice coil
  8x 4" Neodymium magnet drivers with 1.5" voice coil
  4x Neodymium magnet compression driver with 1.5" voice coil

• Frequency Response:  

  70 Hz - 18 kHz (-3 dB)

   ⁽¹⁾

• Max SPL:  

  145 dB peak

   ⁽²⁾

• Coverage:  

  Horizontal: 120°
  Vertical: digitally adjustable with Electronic Beam Steering

• Remote Control:  

  Remote control with dedicated PC software via Ethernet

• Connectors:  

  Analog, AES3 and Remote control:
  Easy-grip metal locking LK25 connector (MIL C 5015 and VG95234 spec.)

Digital Signal Processor

• Built-in DSP:  

  Input gain, delay up to 2 s,
  Full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth),
  FIR filter for digital beam steering
  Level and Temperature remote monitoring

Handling and Finishes

• Dimensions (W x H x D):  

  1170 x 500 x 226 mm (46.1 x 19.7 x 8.89 in)

• Weight:  

  75,2 kg (159.84 lb)

• Material:  

  Stainless Steel

• Colors:  

  Black, Custom RAL

Regulations

• IP Rating:  

  Speaker Box: IP45 / Electronics: IP65

Amplifier

• Amp Module:  

  4-ch., switch mode, class D

• Output Power:  

  8x 2000 W @ 4 Ω 1% THD+N

• Power Consumption:  

  1250 W @ 4 Ω load, Pink noise 1/8 rated power

• Protections:  

  Over Temp. (Power Limiting - Thermal Shutdown), Short Circuit/Overload Output Protection,
  Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection

• Operating Range:  

  100-240V AC, 50-60 Hz with PFC

• Mains Connector:  

  powerCON True

• (1) With dedicated preset
• (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m