The Kommander-KA24 is a 4-channel per 500W on 4Ω power amplifier. It has 4 fully-independent analog IN and 2 AES-EBU IN channels to 4 fully-configurable OUT channels. The KA24 can be used as a mixer for fixed installations thanks to the microphone and Phantom power options available on every analog IN. 2 GPIO ports provides easy external analog controls using K-array accessories.
We created a portfolio complete with lightweight products that are easy to transportation and quick to setup optimizing logistics, space, labor costs and time.
Built-in DSP allows for fine tuning of every single sonic parameter of the loudspeaker, providing the sound engineer the highest control on overall performance and fine granularity in system configuration.
Onboard Touch Screen
An integrated touch screen provides intuitive control over the main DSP functions, from signal routing to level and delay settings.
With the dedicated K-dante accessory, this solution can be integrated into a Dante network making it interoperable with other devices.
- Max Output @ 4Ω 4 x 600 W (1)
- Max Power @ 8Ω 4 x 300 W (1)
- Max Power Bridged@ 8Ω 2 x 1200 W (1)
- Minimum Impendance 4 Ω (Single Channel Mode) 8 Ω (Bridge Mode)
- Distortion (THD+N) <0.09% 1W to full power@4Ω
- Input Impedance 10 kΩ balanced
- Gain 26 dB
- Output Unbalanced to Ground
- Bandwidth 20 Hz - 20kHz (±1 dB)
- Damping Factor >10000 @ 100 Hz
- Thermal yes
- Short Circuit / Over Load yes
- Clip Limit / Analog Signal Limit yes
- Analog Connectors 4 Male + 4Female 3-Pin Balanced XLR
- Digital Connectors 1 Male + 1 Female 3-Pin XLR
Remote controlo input
- Connectors 1 Male + 1 Female XLR Parallel 1 USB B Jack Serial Converter
Audio Powered output
- Connectors 2x4 Pin Speakon NL4
- NL4 1 Wiring 1+1-=A1 / 2+2- =A2
- NL4 2 Wiring 1+1-=B1 / 2+2- =B2
- Connector 2 x PowerCon IN / OUT
- Nominal Voltag 100 - 240V 50/60 Hz with PFC
- Operating Range AC 90 - 264V
- Efficiency > 79% (typical)
- 1/8 rated power (pink noise) @ 8 Ω440 W
- IP 20
- Dimensions 43.0 x 9.4 x 29.5 cm (16.92“ x 3.7” x 11.61“)(2)
- Weight 5.4 kg (11.9 lb)
- Notes for data:
- EIAJ Test Standard, 1KHz, 1%THD
- (W x H x D)
New materials and design are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this catalogue.
KA24 DatasheetVer. 2.0
KA24 KA84 User GuideVer. 1.3
K-framework ManualVer. 2.6
KA24 KA84 DWG 3DVer. 2.1
KA24 KA84 DXF 2DVer. 4.0
K-framework 2.2.8 - WindowsVer. 2.2
KA24 KA84 LayoutVer. 2.1
KA24 KA84 PDF 3DVer. 1.0
KA24 KA84 3DS 3DVer. 1.0
KA24/KA84 Architect SpecsVer. 1.0
Amp-to-Speakers TableVer. 2.1
Kommander-KA24 can be successfully used in a range of different settings and events.