The Vyper-KV52W I is a 50-cm-long passive line array comprised of eight 1” neodymium magnet transducers housed in an elegant and resistant aluminum chassis. The Vyper-KV52W I features two different values of impedance (16Ω – 64Ω) with the benefit of comprising up to 16 units powered from a single 4Ω amplifier channel at the higher impedance, eliminating the need for dedicated 70 V amplifiers in wider distributed installed systems. The Vyper is able to reproduce the whole vocal frequency range with high intelligibility and unparalleled directivity.
Specifications
General
-
Type:
Line Array
-
Transducers:
8 x 1" neodymium magnet woofers
-
Frequency Response:
150 Hz – 18 kHz (-6 dB)
(1) -
Max SPL:
114 dB (peak)
(2) -
Rated Power:
150 W
-
Coverage:
V. 10° | H. 140°
-
Connectors:
2PIN euroblock connector (included)
-
Nominal Impedance:
16 Ω / 64 Ω selectable
Handling and Finishes
-
Dimensions (W x H x D):
40 x 500 x 22 mm (1.6 x 19.7 x 0.9 in)
-
Weight:
0.8 kg (1.76 lb)
-
Material:
Aluminum
-
Colors:
White
-
Finishes:
24K Gold, Polished, Brushed
Regulations
-
IP Rating:
IP65
-
EN54-24:
EN 54-24:2008 compliant
- (1) With dedicated preset.
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.