The Vyper-KV52RII is an ultra-flat passive loudspeaker comprised of eight 1” neodymium magnet transducers, housed in an elegant yet sturdy aluminum chassis designed for in-wall recessed installations.
The eight closely-spaced cone drivers provide true line array characteristics: phase coherence, low distortion and focused listening in both the near field and at a distance from the speaker.
Two different values of impedance (16Ω – 64Ω) allow to connect up to 16x Vyper-KV52 II loudspeakers at 64Ω impedance to the same 4Ω amplifier output channel, which eliminates the need for 70V lines for wide distributed installed systems where pristine sound, intelligibility and elegance are mandatory.
KV52R II black model
KV52RW II white model
KV52RX customizable RAL color and finish (box + grille)
new! KV52RM II, KV52RMW II, KV52RMX II (only RAL colors) = MARINE TREATMENT (on request)
All Vyper-KV52R II components are designed by the K-array R&D department and are custom-made under the K-array quality control system, in Italy.
8 x 1" neodymium magnet woofers
150 Hz – 18 kHz (-6 dB)(1)
114 dB (peak)(2)
V. 10° | H. 140°
2PIN euroblock connector (included)
16 Ω / 64 Ω selectable
Handling and Finishes
Dimensions (W x H x D):
50 x 510 x 37 mm (1.95 x 20.08 x 1.45 in)
0.8 kg (1.76 lb)
Black, White, Custom RAL
24K Gold, Polished
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
Passive loudspeakers require dedicated presets loaded onboard K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
Vyper-KV52R II Datasheet