General

• Type:  

  Line array

• Transducers:  

  12 x 3.15" neodymium magnet woofers

• Frequency Response:  

  120 Hz - 18 kHz (-6dB)

   ⁽¹⁾

• Max SPL:  

  134 dB (peak)

   ⁽²⁾

• Rated Power:  

  720 W AES

• Coverage:  

  V. 7° - 30° | H. 90°

• Connectors:  

  SpeakOn NL4 1+ 1- (signal); 2+ 2- (through)

• Nominal Impedance:  

  4 Ω / 16 Ω selectable

• Sensitivity (1W/1m):  

  99 dB SPL

• Max SPL (Full-Range preset):  

  122 dB (peak)

   ⁽³⁾

• Frequency Response (Full-range preset):  

  70 Hz - 18 kHz (-6dB)

   ⁽⁴⁾

Handling and Finishes

• Dimensions (W x H x D):  

  89 x 1000 x 118 mm (3.5 x 39.4 x 4.7)

• Weight:  

  12.0 kg (26.5 lb)

• Material:  

  Stainless Steel

• Colors:  

  Black, White, Custom RAL

• Finishes:  

  24K Gold, Polished, Brushed

Regulations

• IP Rating:  

  IP64 

   ⁽⁵⁾

• EN54-24:  

  EN 54-24:2008 compliant

   ⁽⁶⁾

• (1) With dedicated preset.
• (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
• (3) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
• (4) With dedicated FULL-RANGE preset
• (5) More complete water protection with K-IP65KITA and K-IP65KITB accessories (IP65 compliant)
• (6) See specification for EN 54-24 applications in products user’s guide

• Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.

• New materials and design are introduced into existing products without previous notice.

General

• Type:  

  Passive subwoofer

• Transducers:  

  21" neodymium magnet woofer

• Frequency Response:  

  30 Hz - 150/300 Hz (-6 dB) crossover dependant

   ⁽¹⁾

• Crossover:  

  DSP-controlled, Low Pass @ 150 Hz, preset dependant

• Max SPL:  

  139 dB

   ⁽²⁾

• Rated Power:  

  2800W peak

• Coverage:  

  Omni

• Connectors:  

  2 x SpeaOn NL4

• Nominal Impedance:  

  4Ω

Handling and Finishes

• Dimensions (W x H x D):  

  735 x 580 x 700 mm 
  (28.9 x 22.83 x 27.55 in)

   ⁽³⁾

• Weight:  

  49,2 kg (108.5 lb)

• Material:  

  Polyurea coated birch plywood

• Colors:  

  Black/White/Custom RAL

Regulations

• IP Rating:  

  IP54

   ⁽⁴⁾

• (1) With dedicated preset
• (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
• (3) Included 17 mm (0.7 in) removable rubber feet
• (4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer. Contact K-array directly to discuss best protection practices.

• Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.

• New materials and design are introduced into existing products without previous notice.

General

• Type:  

  8ch switching mode, Class D Amplifier

• Output Power:  

  8 x 2500W @ 4Ω

   ⁽¹⁾

• Impedance:  

  minimum 4 Ω (2 Ω tolerant)

• Frequency Response:  

  20 Hz - 20 kHz (±1 dB)

• Connections:  

  Input:
  8x XLR-F bal input
  Output:
  4x PC 4/ 4-ST-7,62 speaker output
  Remote connectivity:
  1x Ethernet RJ45
  4x USB-A
  Wi-Fi IEEE 802.11 b/g/n
  Power:
  1 x PowerCon TRUE IN
  1 x PowerCon TRUE Link

• Built-in DSP:  

  Grouping, Equalization, Limiters, Routing, Level, Loudspeaker presets

• Remote Control:  

  Wi-Fi and Ethernet dedicated APP and Desktop software

Power Handling

• Protections:  

  Thermal protection, output short circuit, RMS output current protection, high frequency protection, power limiter, clip limiter.

• MAIN Operating Range:  

  100-240V AC, 50-60 Hz with PFC

• Power Consumption:  

  1200 W @ 4 Ω load, Pink noise, 1/8 rated power

Handling and Finishes

• Colors:  

  Black

• Material:  

  Stainless Steel

• Dimensions (W x H x D):  

  430 x 87 x 430 mm
  (17 x 3,4 x 17 in)

• Weight:  

  10 kg (22 lb)

Regulations

• IP Rating:  

  IP20

• (1) CTA-2006 Standard single channel driven