The Kommander-KA14I is a fully-featured, 4x600W@2Ω amplifier platform with DSP highly integrated into the K-array collection ecosystem. The Kommander-KA14I offers pristine sound and complete control over the connected loudspeakers, either as a stand-alone driving unit and in conjunction with other K-array amplifiers in complex and demanding applications. The dedicated K-array Connect mobile app provides a user-friendly interface for remote control of the DSP main parameters and easy configuration of the signal routing.
K-framework3 is the managing and control software dedicated to professionals and operators looking for a powerful tool for loudspeakers system design and tuning of large a number of units over a wired LAN.
Specifications
General
-
Type:
4ch switching mode, Class D Amplifier
-
Output Power:
4x 600W @ 2Ω
(1) -
Impedance:
minimum 2 Ω
-
Frequency Response:
20 Hz – 20 kHz (±1 dB)
-
Connections:
Input:
4x XLR-F bal input
4x XLR-M bal LINK output
Output:
2x PC 4/ 4-ST-7,62 speaker output
Remote connectivity:
1x Ethernet RJ45 4x USB-A Wi-Fi IEEE 802.11 b/g/n
Power:
1 x PowerCon TRUE IN
1 x PowerCon TRUE Line -
Built-in DSP:
Grouping, Equalization, Limiters, Routing, Level, Loudspeaker presets
-
Remote Control:
Wi-Fi and Ethernet dedicated APP and Desktop software
Power Handling
-
Protections:
Thermal protection, output short circuit, RMS output current protection, high-frequency protection, power limiter, clip limiter.
-
MAIN Operating Range:
100-240V AC, 50-60 Hz with PFC
-
Power Consumption:
400 W @ 4 Ω load, Pink noise, 1/8 rated power
Handling and Finishes
-
Colors:
Black
-
Material:
Stainless Steel
-
IP Rating:
IP20
-
Dimensions (W x H x D):
430 x 87 x 430 mm
(17 x 3,4 x 17 in) -
Weight:
6 kg (13,2 lb)
- (1) EIAJ test standard (single channel driven)

Q-SYS
To easily integrate K-array's latest electronics with any Q-SYS configuration, download and install the dedicated pluging on your Q-SYS control device to allow it to recall different K-array product presets, change the in-out matrix settings and manage the output levels of all the connected K-array devices.

CONTROL 4
Integrating K-array's latest electronics with any Control4 system has become easy: download and install the dedicated pluging on your Control4 device, allow it to recall different K-array product presets and manage the output levels of all the connected K-array technologies.

Crestron Home
Make K-array ultra-sleek and unique products get along with your Crestron Home Control System. Finally, the perfect combination of discreet elegance and powerful high-quality sound meets cutting-edge automation in the same system. K-array has developed its own plug-in to install onto your Crestron Home electronics in order to control the media player and sound levels of the K-array amps connected to your system.

Crestron
The plug-in that gives your Crestron Electronics full control on K-array amps is finally out there! Download and install it, then get ready to have full management of the output levels, on/off switching, integrated media player, source selection and mute mode on each in/out channel of all your K-array amps connected to your systems.

AMX by Harman
K-array's latest electronics can be easily controlled by AMX modules as well now. Download and install the dedicated plugin on your AMX control device to recall different K-array product presets, change the in-out matrix settings and manage the output levels of all the connected K-array devices straight from your control system.

Dante Ready
K-array's Dante Ready, a licensing program by Audinate, lets users activate as many Dante audio channels as needed in-field. To activate, connect your K-array device to the internet and run the Dante Activator function in the Dante Controller, which identifies eligible products and applies purchases instantly.
Download the Dante Controller for free!
Downloads
Kommander-KA14 I Datasheet
ver 0.2
Kommander-Ka User Guide
WEB APP Quick Start Guide
CRESTRON HOME plug-in
CRESTRON plug-in
Q-SYS Plug-in
Rev 1.0.0
Control4 Plug-in KA
K-MONITOR 1.2.2 MacOS
K-MONITOR 1.2.2 Windows
CB Test Certificate
Amp-to-speaker matching table
Dante Ready Activation Guide
Ver 0.1
CE DECLARATION OF CONFORMITY
osKar System Update 1.7.8
KFramework3 v2.0.9 Windows
Ver. 2.0.9
KFramework3 v2.0.9 Osx
Ver. 2.0.9
Backstage
Brian & Barry Deparment Store
The Brian & Barry Building in Milan is a 50s-style flagship store elegantly designed by architect Giovanni Muzio. Or...
View DetailsThe Ranch Gallery
When it comes to audio and lighting we have always seen them as two different worlds apart but when combined together, t...
View DetailsAudinate’s Dante Ready launches in market with K-array Amplifiers
Reaffirming its market leadership in professional-grade audio and video IP networking solutions, Audinate (ASX:AD8) have...
View Details