The Pinnacle-KR802 II is composed of:
1x Thunder-KS4P I passive subwoofer
1x Thunder-KS4 I active subwoofer
4x Kayman-KY102 stainless steel line array element with 4" drivers
4x K-JOINT3
2x K-FOOT3
The self-powered Thunder-KS4 I subwoofers with DSP are designed to be the core devices in the sound reinforcement system: the dedicated K-array Connect mobile app provides a user-friendly interface for the remote control, the DSP parameters and to boost the system performance.
K-framework3 is the managing and control software dedicated to professionals and operators looking for a powerful tool for designing and managing a large number of units over a wired LAN in demanding applications.
Kayman-KY102
General
-
Type:
Line array
-
Transducers:
8 x 4" neodymium magnet woofers
-
Frequency Response:
120 Hz – 20 kHz (-6 dB)
(1) -
Max SPL:
138 dB (peak)
(2) -
Rated Power:
1200 W
-
Coverage:
V. 7° - 30° | H. 90°
-
Connectors:
SpeakOn NL4 1+ 1- (signal); 2+ 2- (through)
-
Nominal Impedance:
8 Ω / 32 Ω selectable
-
Max SPL (Full-Range preset):
126 dB (peak)
(3) -
Frequency Response (Full-range preset):
70 Hz – 20 kHz (-6 dB)
(4)
Handling and Finishes
-
Dimensions (W x H x D):
116 x 1000 x 134 mm (4.6 x 39.4 x 5.3 in)
-
Weight:
14.9 kg (32.8 lb)
-
Material:
Stainless Steel
-
Colors:
Black, White, Custom RAL
-
Finishes:
24K Gold, Polished, Brushed
Regulations
-
IP Rating:
IP64
(5)
- (1) With dedicated preset.
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
- (3) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
- (4) With dedicated FULL-RANGE preset.
- (5) More complete water protection with K-IP65KITA and K-IP65KITB accessories (IP65 compliant)
Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
Thunder-KS4P I
General
-
Type:
Passive subwoofer
-
Transducers:
2 x 18" neodymium magnet woofer
-
Frequency Response:
30 Hz – 150/450 Hz (-6 dB) crossover dependant
(1) -
Crossover:
DSP-controlled, Low Pass @ 150 Hz, preset dependant
-
Max SPL:
141dB
(2) -
Coverage:
Omni
-
Rated Power:
2800W peak
-
Connectors:
2 x Speakon NL4
-
Nominal Impedance:
4ohm
Handling and Finishes
-
Dimensions (W x H x D):
1106 x 500 x 580 mm
(43.5 x 19.7 x 22.8 in)(3) -
Weight:
53,2 kg (117.3 lb)
-
Material:
Polyurea coated birch plywood
-
Colors:
Black/White/Custom RAL
Regulations
-
IP Rating:
IP54
(4)
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
- (3) Included 17 mm (0.7 in) removable rubber feet
- (4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer. Contact K-array directly to discuss best protection practices.
Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
Thunder-KS4 I
General
-
Type:
Active subwoofer
-
Transducers:
2 x 18" neodymium magnet woofer
-
Frequency Response:
30 Hz – 150/450 Hz (-6 dB) crossover dependant
(1) -
Crossover:
DSP-controlled, Low Pass @ 150 Hz, preset dependant
-
Max SPL:
141 dB
(2) -
Coverage:
Omni
-
Connectors:
Line Input
2x XLR-F analog / AES3
Line Output
2x XLR-M Link analog / AES3
Speaker Output
2x SpeakON NL4
Mains
powerCON TRUE1 TOP
Networking and Data
1x RJ45
4x USB-A -
Nominal Impedance:
4ohm subwoofer
-
Controllers:
Wi-Fi dedicated Mobile APP
K-framework3 via wired Ethernet connection -
Built-in DSP:
Input gain, routing matrix, delay, full parametric IIR filters (Peaking, Shelving, Hi/ Lo pass, Hi/Lo Butterworth), Onboard preset, Remote monitoring
Handling and Finishes
-
Dimensions (W x H x D):
1106 x 500 x 580 mm
(43.5 x 19.7 x 22.8 in)(3) -
Weight:
60 kg (132.3 lb)
-
Material:
Polyurea coated birch plywood
-
Colors:
Black/White/Custom RAL
Regulations
-
IP Rating:
53
(4)
Amplifier
-
Amp Module:
4-ch Class D
-
Output Power:
4 x 2500W @ 4ohm
(5) -
Power Consumption:
600 VA @ 8 Ω load, Pink noise, 1/8 rated power
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
- (3) Included 17 mm (0.7 in) removable rubber feet
- (4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer. Contact K-array directly to discuss best protection practices.
- (5) CTA-2006 Standard single channel driven
New materials and design are introduced into existing products without previous notice.
CONTROL 4
Integrating K-array's latest electronics with any Control4 system has become easy.
Crestron Home
Make K-array ultra-sleek and unique products get along with your Crestron Home Control System.
Crestron
The plug-in that gives your Crestron Electronics full control on K-array amps is finally out there!
AMX by Harman
K-array's latest electronics can be easily controlled by AMX modules as well now.
Dante Ready
K-array's Dante Ready, a licensing program by Audinate.
Download the Dante Controller for free!
Downloads
KR802-804 II DATASHEET
ver 2.1
Dante Ready Activation Guide
CRESTRON HOME plug-in
CRESTRON plug-in
WEB APP Quick Start Guide
Q-SYS Plug-in
Rev 1.0.0
KR802 II DWG 3D
PINNACLE MARK II SYSTEM CONFIGURATIONS
Pnnacle User Guide
ver 0.5
KFramework3 v3.2.0 Osx
Ver. 3.2.0
KFramework3 v3.2.0 Windows
Ver. 3.2.0
Related accessories
Case Studies
Vinicio Capossela 'Ballate per Uomini e Bestie' Tour
With so many column audio systems in the market, it is never easy to find the right balance of performance and price in...
View Details