
Incredibly flat and lightweight, the new Mugello-KH3 I is the medium line array element in K-array Mugello Series. The self-powered speaker is comprised of two 12” neodymium magnet woofers each with a 2.5” voice coil and two compression drivers with a 2.5” voice coil. Up to 3x Mugello-KH3P I passive line array elements can be driven by a single active Mugello-KH3 I thanks to its powerful four-channel Class-D 1500W @ 4Ω amplifier module with DSP.
The Slim Array Technology of the Mugello-KH3 I allows for a better impulse response and guarantees unique cardioid polar pattern over its entire frequency range. Along with the mechanical steering, K-array’s Electronic Beam Steering technology gives the Mugello-KH3 I the ability to digitally adjust the dispersion of the sound beams to ensure the perfect aiming of the sound field.
Specifications
General
-
Type:
Active line array element
-
Transducers:
2x 12" neodymium magnet woofer with 2.5" voice coil
2x compression driver with 2.5" voice coil -
Frequency Response:
120 Hz - 19 kHz (-6 dB)
(1) -
Max SPL:
144 dB peak
(2) -
Coverage:
V. 20° digitally adjustable in array | H. 110°
-
Remote Control:
Wi-Fi dedicated Mobile APP
K-framework3 via wired Ethernet connection -
Connectors:
Line Input
2x XLR-F analog / AES3
Line Output
2x XLR-M Link analog / AES3
Speaker Output
1x SpeakON NL4
Mains
powerCON TRUE TOP
Networking and Data
1x RJ45
4x USB-A
Digital Signal Processor
-
Built-in DSP:
Input gain, delay up to 330 ms,
8 full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth),
FIR filter for electronic beam steering
Onboard preset,
Level and temperature remote monitoring
Handling and Finishes
-
Dimensions (W x H x D):
1218 x 456 x 210 mm (47.9 x 17.9 x 8.3 in) with rigging hardware
1104 x 370 x 200 mm (43.5 x 14.5 x 7.9 in) net dimensions -
Weight:
43,6 kg / 96,12 lb (with rigging hardware)
-
Material:
Polyurea coated birch plywood
-
Colors:
Black, White, Custom RAL
Regulations
-
IP Rating:
IP53
Amplifier
-
Amp Module:
4 ch Class D amp module
-
Output Power:
4 x 1500W @ 4ohm
-
Power Consumption:
600 W @ 8 Ω load, Pink noise, 1/4 rated power
-
Protections:
Over Temp. (Power Limiting - Thermal Shutdown), Short Circuit/Overload Output Protection,
Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection -
Operating Range:
100-240V AC, 50-60 Hz with PFC
-
Mains Connector:
powerCON TRUE TOP
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m

CONTROL 4
Integrating K-array's latest electronics with any Control4 system has become easy.

Crestron Home
Make K-array ultra-sleek and unique products get along with your Crestron Home Control System.

Crestron
The plug-in that gives your Crestron Electronics full control on K-array amps is finally out there!

AMX by Harman
K-array's latest electronics can be easily controlled by AMX modules as well now.

Dante Ready
K-array's Dante Ready, a licensing program by Audinate.
Download the Dante Controller for free!
Downloads
CRESTRON plug-in
Q-SYS Plug-in
Rev 1.0.0
Mugello-KH User Manual
Mugello-KH3 I Datasheet
CE Declaration of Conformity
Dante Ready Activation Guide
Ver 0.2
osKar System Update 1.8.0
KH3 DXF 2D
VER. 3.0
KH3 Layout
Ver. 1.2
KH3 I DWG 3D
KH3 PDF 3D
Ver. 2.0
KFramework3 v2.1.5 Osx
Ver. 2.1.5
KFramework3 v2.1.5 Windows
Ver. 2.1.5
Related accessories
Backstage
Bros Reunion Concert at O2 Arena
Formed in 1986 by brothers Matt and Luke Goss plus drummer Craig Logan, Bros were one of the most successful pop acts of...
View DetailsI am a Singer TV Broadcast
I Am a Singer is a Chinese singing competition broadcast on Hunan TV where talented singers perform for a selected audie...
View DetailsQasr Al Sultan Restaurant and Concert Venue
Located in the desert of Jebel Ali, the Qasr al Sultan is a multi-purpose venue that offers traditional performances, a...
View Details