General

• Type:  

  Active line array element

• Transducers:  

  2x 15" neodymium magnet woofer with 2.5" voice coil
  4x compression driver with 2.5" voice coil

• Frequency Response:  

  120 Hz - 19 kHz (-6 dB)

   ⁽¹⁾

• Max SPL:  

  147 dB peak

   ⁽²⁾

• Coverage:  

  V. 7° digitally adjustable in array | H. 110°

• Remote Control:  

  Wi-Fi dedicated Mobile APP
  K-framework3 via wired Ethernet connection

• Connectors:  

  Line Input
  2x XLR-F analog / AES3
  Line Output
  2x XLR-M Link analog / AES3
  Mains
  powerCON TRUE TOP
  Networking and Data
  1x RJ45
  4x USB-A

Digital Signal Processor

• Built-in DSP:  

  Input gain, delay up to 330 ms,
  8 full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth),
  FIR filter for electronic beam steering
  Onboard preset,
  Level and temperature remote monitoring

Handling and Finishes

• Dimensions (W x H x D):  

  1218 x 604 x 210 mm (47.9 x 23.8 x 8.3 in) with rigging hardware
  1104 x 520 x 200 mm (43.5 x 20.5 x 7.9 in) net dimensions

• Weight:  

  64 kg / 134.48 lb (with rigging hardware)

• Material:  

  Polyurea coated birch plywood

• Colors:  

  Black, White, Custom RAL

Regulations

• IP Rating:  

  IP53

Amplifier

• Amp Module:  

  4-ch., switch mode, class D

• Output Power:  

  4 x 1500W @ 4ohm

• Power Consumption:  

  600 W @ 8 Ω load, Pink noise, 1/4 rated power

• Protections:  

  Over Temp. (Power Limiting - Thermal Shutdown), Short Circuit/Overload Output Protection,
  Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection

• Operating Range:  

  100-240V AC, 50-60 Hz with PFC

• Mains Connector:  

  powerCON TRUE TOP

• (1) With dedicated preset
• (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m