The Thunder-KS2P I is a compact passive subwoofer featuring a long excursion 18” neodimium magnet woofer with 3” voice coil. The Thunder-KS2P I features 2x SpeakON NL4 connectors that allow to input the signals from external active systems or amplifiers, with either a 2-wire or a 4-wire cable, as well as route the signal to other loudspeakers.
Specifications
General
-
Type:
Passive subwoofer
-
Transducers:
18" neodymium magnet woofer
-
Frequency Response:
35 Hz - 150/450 Hz (-6 dB) crossover dependant
(1) -
Crossover:
External DSP-controlled,
Low Pass @ 150 Hz up to 450 Hz, preset dependant -
Max SPL:
137 dB
(2) -
Rated Power:
1400W peak
-
Coverage:
Omni
-
Coverage:
2 x Speakon NL4
-
Nominal Impedance:
8ohm
Handling and Finishes
-
Dimensions (W x H x D):
650 x 500 x 580 mm
(25.6 x 19.7 x 22.8 in)(3) -
Weight:
34 kg (75 lb)
-
Material:
Polyurea coated birch plywood
-
Colors:
Black/White/Custom RAL
Regulations
-
IP Rating:
IP54
(4)
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
- (3) Included 17 mm (0.7 in) removable rubber feet
- (4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer. Contact K-array directly to discuss best protection practices.
Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
Downloads
Thunder-KS2P l Datasheet
ver 1.0
Amp-to-speaker matching table
Thunder KS User Manual
KS MK1 Subwoofer Quick Guide
KS2P Layout
KS2 I DWG 3D
Thunder-KS2P I BIM
CE Declaration of Conformity
Related accessories
Backstage
Sommerro Hotel and Cultural Hub
When billionaire and owner of Nordic Hotels and Resorts, Petter Stordalen, wanted to open a new flagship hotel and cultu...
View Details