The Vyper-KV102 II is an ultra-flat passive loudspeaker comprised of sixteen 1” neodymium magnet transducers each, housed in an elegant yet sturdy aluminum chassis, with a new frameless chassis designed for very elegant discreet installations, perfect for a clean bracketless application on any flat surface.
The sixteen closely-spaced cone drivers provide true line array characteristics: phase coherence, low distortion and focused listening in both the near field and at a distance from the speaker.
Two different values of impedance (8Ω – 32Ω) allow to connect up to 8x Vyper-KV102 II loudspeakers at 32Ω impedance to the same 4Ω amplifier output channel, which eliminates the need for 70V lines for wide distributed installed systems where pristine sound, intelligibility and elegance are mandatory.
KV102 II black model
KV102W II white model
KV102X customizable RAL color and finish (box + grille)
new! KV102M II, KV102MW II, KV102MX II (only RAL colors) = MARINE TREATMENT (on request)
All Vyper-KV102 II components are designed by the K-array R&D department and are custom-made under the K-array quality control system in Italy.
16x 1” Neodymium magnet woofers
150 Hz - 18 kHz (-6 dB)(1)
120 dB peak(2)
V. 7° | H. 140°
2PIN euroblock connector (included)
8 Ω - 32 Ω
1,8 kg (3.96 lb)
Handling and Finishes
Dimensions (W x H x D):
40 x 1000 x 22 mm (1.6 x 39.3 x 0.9 in)
Black, White, Custom RAL
24K Gold, Polished
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
Passive loudspeakers require dedicated presets loaded onboard K-array amplifiers.
New materials and designs are introduced into existing products without previous notice.
Vyper-KV102 II Datasheet
EASE DATA Rev 2
Vyper II USER GUIDE
Vyper-KV102 II DWG 3D
Vyper-KV102 II Layout