Vyper-KV52 II is an ultra-flat passive loudspeaker comprised of eight 1” neodymium magnet transducers each, housed in an elegant yet sturdy aluminum chassis, with a new frameless chassis designed for very elegant discreet installations, perfect for a clean bracketless application on any flat surface.
The eight closely-spaced cone drivers provide true line array characteristics: phase coherence, low distortion and focused listening in both the near field and at a distance from the speaker.
Two different values of impedance (16Ω – 64Ω) allow to connect up to 16x Vyper-KV52 II loudspeakers at 64Ω impedance to the same 4Ω amplifier output channel, which eliminates the need for 70V lines for wide distributed installed systems where pristine sound, intelligibility and elegance are mandatory.
KV52 II black model
KV52W II white model
KV52X customizable RAL color and finish (box + grille)
new! KV52M II, KV52MW II, KV52MX II (only RAL colors) = MARINE TREATMENT (on request)
All Vyper-KV52 II components are designed by the K-array R&D department and are custom-made under the K-array quality control system in Italy.
Passive line array loudspeaker
8x 1” Neodymium magnet woofers
150 Hz - 18 kHz (-6 dB)(1)
114 dB peak(2)
V. 10° | H. 140°
2x Euroblock 2,5/ 2-ST-5,08
16 Ω - 64 Ω
Handling and Finishes
Dimensions (W x H x D):
40 x 500 x 22 mm (1.6 x 19.7 x 0.9 in)
0.8 kg (1.54 lb)
Black, White, Custom RAL
24K Gold, Polished
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
Passive loudspeakers require dedicated presets loaded onboard K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
Vyper-KV52 II Datasheet
Vyper II USER GUIDE
Vyper-KV52 ll DWG 3D
Vyper-KV52 II Layout