General

• Type:  

  Passive line array element

• Transducers:  

  2x 8” neodymium magnet woofer with 2.5” voice coil
  2x compression driver with 2.5” voice coil

• Frequency Response:  

  120 Hz – 19 kHz (-6 dB)

   ⁽¹⁾

• Max SPL:  

  142 dB peak

   ⁽²⁾

• Rated Power:  

  Bi-amp:
  HF: 250 Wpeak
  LF: 1200 Wpeak

• Nominal Impedance:  

  HF: 16 ohm
  LF: 8 ohm

• Coverage:  

  V. 20° digitally adjustable in array | H. 110°

• Connectors:  

  SpeakON 1
  1+ 1- Driver 250W@16ohm
  2+ 2- Woofer 1200W@8ohm
  SpeakON 2
  Link (SpeakON 1)

Handling and Finishes

• Dimensions (W x H x D):  

  860 x 370 x 210 mm (33.8 x 14.6 x 8.3 in) with rigging hardware
  735 x 285 x 200 mm (28.9 x 11.2 x 7.9 in) net dimensions

• Weight:  

  24 kg / 53 lb (with rigging hardware)

• Material:  

  Polyurea coated birch plywood

• Colors:  

  Black, White, Custom RAL

Regulations

• IP Rating:  

  IP54 

   ⁽³⁾

• (1) With dedicated preset
• (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
• (3) In case of permament, long lasting outdoor installation, we recommend to further protect the speaker. Contact K-array directly to discuss best protection practices.

General

• Type:  

  Passive subwoofer

• Transducers:  

  21" neodymium magnet woofer

• Frequency Response:  

  30 Hz - 150/300 Hz (-6 dB) crossover dependant

   ⁽¹⁾

• Crossover:  

  DSP-controlled, Low Pass @ 150 Hz, preset dependant

• Max SPL:  

  139 dB

   ⁽²⁾

• Rated Power:  

  2800W peak

• Coverage:  

  Omni

• Connectors:  

  2 x SpeaOn NL4

• Nominal Impedance:  

  4Ω

Handling and Finishes

• Dimensions (W x H x D):  

  735 x 580 x 700 mm 
  (28.9 x 22.83 x 27.55 in)

   ⁽³⁾

• Weight:  

  49,2 kg (108.5 lb)

• Material:  

  Polyurea coated birch plywood

• Colors:  

  Black/White/Custom RAL

Regulations

• IP Rating:  

  IP54

   ⁽⁴⁾

• (1) With dedicated preset
• (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
• (3) Included 17 mm (0.7 in) removable rubber feet
• (4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer. Contact K-array directly to discuss best protection practices.

• Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.

• New materials and design are introduced into existing products without previous notice.

General

• Type:  

  8ch switching mode, Class D Amplifier

• Output Power:  

  24 x 2500W @ 4Ω

   ⁽¹⁾

• Impedance:  

  minimum 4 Ω (2 Ω tolerant)

• Connections:  

  Input:
  4x XLR-F bal input
  4x XLR-M bal parallel link
  Output:
  12x NL4 SpeakON connectors (24 channels)
  Remote connectivity: 
  2x RJ45 ports
  Wi-Fi IEEE 802.11 b/g/n
  Power:
  3-phase CEE 3P+N+T 32A 400V main socket
  1x powerCON auxiliary AC main out

• Built-in DSP:  

  Grouping, Equalization, Limiters, Routing, Level, Loudspeaker presets

• Remote Control:  

  Ethernet dedicated desktop software

Power Handling

• Protections:  

  Thermal protection, output short circuit, RMS output current protection, high-frequency protection, power limiter, clip limiter.

• MAIN Operating Range:  

  3-phase 32A 400V main

• Power Consumption:  

  3600 W @ 4 Ω load, Pink noise, 1/8 rated power

Handling and Finishes

• Colors:  

  Black

• Dimensions (W x H x D):  

  600 x 820 x 730 mm 
  (23,62 x 32.28 x 28.74 in)

• Weight:  

  97,2 Kg
  (214.29 lb)

Regulations

• IP Rating:  

  IP20

• (1) CTA-2006 Standard single channel driven