The Lyzard-KZ1 I ultra-mini point source loudspeaker is the smallest member of K-array’s Lyzard mid-high micro-loudspeaker range. Featuring a miniaturised ultra-resistant 2.2 x 3.7 1.1 cm milled aluminium enclosure housing a single 0.5” long-excursion neodymium magnet transducer for a total weight of just 21 g, the Lyzard-KZ1 ensures uncompromised audio performance with minimum residual noise, despite its discreet dimensions. The form and quality of the Lyzard series make it the perfect solution for environments that require high-performance audio where decor and aesthetics cannot be compromised.
With a horizontal and vertical coverage of 140° and a frequency response from 500 Hz up to 18 kHz, KZ1 I provides clear audio reproduction and flawless intelligibility at a peak SPL of 86 dB, an impressive performance for a miniature loudspeaker.
To complete the full frequency range of your audio systems, Lyzard loudspeakers must be combined with one or more of the Truffle or Rumble subwoofers and driven by one of our Kommander amplifiers.
Lyzard loudspeakers are available in semi-matte black or white as standard, or any RAL colour, as well as several premium finishes, on request. Polished aluminium, 24K gold, rose gold or antique gold plating are among the most luxurious finishes.
The front of the loudspeaker cabinet is protected by a magnetic grille that can be removed with a small neodymium magnet knob, included in the package. This new feature makes the fixing point much faster to access, helping installers reduce set-up and maintenance times. The rear panel incorporates a small two-pole screw euro-block connector, so no specific connector is required, further streamlining the installation process.
The Lyzard KZ1R I is our newest model, designed with a metallic spring clip for recessed in-wall installation and fast and easy mounting.
The Lyzard KZ1 I and KZ1R I are ideally suited for audio integrations in retail environments, small lounges and bars, home residences, hotels and museums, allowing venues to maintain their aesthetic whilst keeping listeners satisfied with high-quality sound.
The main product models and codes are:
KZ1 I / KZ1R I - black model / black recessed model
KZ1W I / KZ1RW I - white model / white recessed model
KZ1X I / KZ1RX I - customisable colour (box + grille) / customisable recessed colour (box + grille)
All Lyzard KZ1 I KZ1R I components are designed by the K-array R&D department, custom manufactured to our exacting standards and subject to our rigorous quality control system in Italy.
Specifications
General
-
Type:
Point source
-
Transducers:
0.5" neodymium magnet woofer
-
Frequency Response:
500 Hz – 18 kHz (-6 dB)
(1) -
Max SPL:
86 dB (peak)
(2) -
Rated Power:
3.5 W
-
Coverage:
V. 140° | H. 140°
-
Connectors:
IN+ IN- screw terminals
-
Nominal Impedance:
16 Ω
Handling and Finishes
-
Dimensions (W x H x D):
22 x 37 x 11 mm (0.9 x 1.5 x 0.4 in)
-
Weight:
0.021 kg (0.046 lb)
-
Material:
Aluminum
-
Colors:
Black, White, Custom RAL
-
Finishes:
24K Gold, Polished
Regulations
-
IP Rating:
IP64
- (1) With dedicated preset.
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m
Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
Downloads
Lyzard-KZ1 I Datasheet
Lyzard-KZ1 I Layout
Lyzard-KZ1 I BIM
Lyzard I User Guide
KZ1 I DWG 3D
CE Declaration of Conformity
Backstage
Pedra Dura Restaurant
Located in the center of Ericeira, a beach village in Lisboa, the Pedra Dura restaurant is popular with tourists and sur...
View DetailsBrowns Luxury Boutique
The luxury boutique Browns changed the course of fashion retail history since it opened in 1970. Today, after fifty year...
View Details